General Painting Technique


For General Painting Techniques, you may want to look into details on: Chalkboard Paint, Door Painting, Faux Finishing and Painting, Indoor Painting Projects, Interior and Airless Paint Sprayers, Magnetic Paint, Paint Applicator Overview, Paint Contractors, Painting Kitchen Cabinets, Painting Various Surfaces, Prepping Interior Surfaces, Stenciling, Texturizing, Wall Murals and Zero VOC Paint.

Here are the key steps to preparing a room for a new coat of paint or paper. Whatever type of surface you're going to tackle it must be clean, dry and smooth for the best results - preparation is the secret of a good-looking finish.

Time to complete job: Preparing a room for a new coat of paint or paper will take at least half a day, including filling and smoothing old plaster.

Tip: Before to begin, always protect yourself by using a dust mask and your floor by laying down dust sheets.

Step 1: Ensure that the surface is smooth.
Using a sanding block, or cork block with sanding paper attached and a flexible filling knife where necessary, remove all debris such as paint flakes. For more tips on stripping back paint, see Paint Stripping. If there is wallpaper on the walls this will need removing. For tips on doing this, see Stripping Wallpaper.

Step 2: Repairing damaged plaster
Sometimes patches of old plaster become loose or cracked. Pick out the loose areas with your filling knife and repair the areas with plaster filler. Work methodically over the whole room to make sure you have treated all the damaged areas. When the filler is dry, use an electric sander or sanding block to smooth any rough areas of plaster and blend in the new repairs. Very powdery plasterwork or new bare plaster should be coated with a coat of plaster sealer. Depending on the size that requires repairing, you may need to patch it up. Tip: In order to ensure as nice a finish around the door frames and skirting boards as possible ensure that no cracks are present. Ensure that you remove any debris such as flaking pain and anything else that does not belong and then seal the gaps by carefully applying the decorators sealant.

Step 3: Cleaning
Wash off any black mould with a solution of household bleach and leave to dry. Stains left by mould or tobacco use can quite easily be masked with anti damp paint or watered down unibond which are available at all hardware stores. Tip: It's essential to treat the cause of mould and damp patches before redecorating.

The right home improvement products, techniques, and services:
Contractors, home improvement stores, and specialty shops in your area may not yet have a complete familiarity with the ‘green’ opportunities, products, system integration, and overall savings potential. So, you may get some resistance, since people in general are typically more comfortable recommending something that they are already familiar with rather than something new. To help break the inertia, use the information across this website like our Return on Investment Master ROI Table. Also feel free to post a question in our forum on the message board about a particular need for your home relative to your area. Our team has spent multiple years aggregating research from public and private sector performance reports and from manufacturers and homeowners across the country in order to provide you with the perspective you may need to see the initial payback and long term advantages. Environmental enthusiasts and leading institutions like the American Institute of Architects and the National Association of Realtors, see the value and link into our resources to support their members.

The Green Home:
For your overall home improvement, you can save money, improve your family’s health, and save the planet. Find out for free how much it will cost to do different types of home improvement in your home from a qualified and member approved contractor in your area. Get a FREE Quote . Plus, regardless of the size and scope of your home improvement project, save money and keep your home clean with the top rated chemical free and concentrated Green Home Cleaning Products.

Home Improvement Basics:
When it comes to home improvement basics, look for interior home improvements like creating a clean, safe, and healthy home through sustainable ‘green’ furniture, home décor, zero VOC and Interior Paint, plus ENERGY STAR Appliances and Electronics. For energy and utility savings you can focus on insulation and air sealing, windows, doors, lighting and skylights, water saving plumbing opportunities, and high efficiency heating and air conditioning systems. On the outside of your house, look for exterior home improvement opportunities through landscape design and gardening plus solar energy, wind and other power sources. If you are undertaking a major home renovation, an additions, or building a new home, then take the lead to ‘go green’ in as many ways as possible to save money and the environment.

test image for this block